Table of Contents
Advertisement
1
Pull the operation panel knob on the
right side of the machine forward, and
open the operation paneI.
s The buzzer will sound briefly.
1
Remove the packing paper from the
\l
/
paper compartment.
\
2
Note: The paper roll provided is only a
sample roll which is approximately 15 m
long. The UX-114 uses a standard 30 m roll.
Unwrap the roll of recording paper and
insert it in the compartment.
Important: The roll should be placed
so that the leading edge of the paper
feeds from the top of the roll.
Make sure the hubs on each side of
the compartment fit into the ends of
the roll, The hub on the left side is
mounted on a spring to allow for inser-
tion.
3
Pass the leading edge of the paper
through the received document exit.
G Make sure there is no slack in the
paper.
Close the operation panel by gently
pushing down on the centre.
Press the START key.
Grasp the paper
upwards to tear it
by the edge and pull
off.
2-4
INSTALLATION
Advertisement
Table of Contents
