Problems And Solutions - Sharp UX-144 Operation Manual

PROBLEMS AND SOLUTIONS
c
~(
Problem Check and remedy
,
Nothing is printed when you try
~Y " Make sure that the recording paper is properly loaded
~ to receive a document.
1 in your machine.
I
1
Q Make sure the power is on.
)
~ The recording paper does not
~ come out.
i The received image has low
' contrast.
~ Received images are distorted.
1
~' Copies are distorted.
I
Make sure that the document for transmission is
loaded face down in the feeder of the other machine.
Make sure the paper is not jammed (see "Clearing
jammed recording paper" in this chapter).
Make sure that the recommended recording paper is
used (see "Recording paper" in Chapter 9).
Ask the other party to send higher contrast
documents. If the contrast is still too low, your
machine may have a problem. Make a copy to check
it.
Noise on the telephone line may cause dist~rtion,
Have the other party try sending the document again.
The recording head may be dirty (see "Cleaning the
scanning and printing parts" in Chapter 9).
Make a copy of another document on your machine. If
the copy is also distorted, your machine may have a
problem. If the problem persists, call for service.
I 1'
1
I
I
1
~'
1
~
Ii
!
, Reception/copying is interrupted.
Make sure that the recommended recording paper is
used (see "Recording paper" in Chapter 9).
Make sure that the recording paper is properly loaded
in your machine.
The recording head may be dirty (see "Cleaning the
scanning and printing parts" in Chapter 9).
Make a copy of another document on your machine. If
the copy is also distotied, your machine may have a
problem. If the problem persists, call for service.
If reception or copying has been done continuously
for a long time, the recording head maybe
overheated. Turn off the power and let it cool down.
9-2
TROUBLESHOOTING