Media Type; Media Source; Document Server; File Name - Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual

JOB EDITOR
Note: Custom paper sizes are not supported for the
feature "Combine"!

• Media Type

Use this selection menu to choose the media type for printing
the summarized pages: any, paper, transparency, film and envi-
ronment paper. The choice depends on what you have put on
the rolls of your plotter.

• Media Source

Select one of the shafts with the rolls for the different print mate-
rials (paper, film, etc.). The rolls can differ in width.
If you choose the "auto" setting, the plotter chooses the medium
supply corresponding to the format size of the drawing. If this
medium has been used up, the plotter chooses the roll with the
next larger format.
You can use the manual feed option to insert a special medium
in the plotter. The print job is marked blue in the job list.
• Direction
Finally, indicate the order for printing the individual pages on
the sheet. The "Z" direction prints the pages line by line ar-
ranged from left to right until the line is full, before beginning
with the next line. The "И" direction arranges the pages in col-
umns from top to bottom until the column is full, before begin-
ning with the next column.

Document Server

If the corresponding job is not to be printed directly but sent to
the plotter's document server, activate the function with "on".
Your job can contain several drawings and depends on how
much memory is available in your plotter's document server.
Consult your plotter manual for details if necessary. Adjust the
following settings:

• File Name

Give an unequivocal file name to the job being sent to the
document server.
RW-480 CLIENTS 39