Snmp Monitor; Device List" Tab - Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual

SNMP Monitor

The SNMP printer monitor shows you the properties of the plot-
ter connected to the system. The monitor is opened under "File -
Device Information":

"Device List" tab

The "Device List" tab gives you the following information:
• Device
This displays all the units connected, numbered from Printer 0 to
Printer x. In the current program version however only one plot-
ter is ever connected.
State
•
The State displays general information, e.g. ready to print, there
is an error, or paper has run out.
Tray Count
•
This list shows the number of trays, i.e. how many reels the plot-
ter has.
Model
•
This brings up the complete model number, e.g. "RW-480".
PRESETS
RW-480 CLIENTS 31