Administrator Password (Admin) - Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual

2. Enter the name of your in-house mail server in the first field.
Ask your network administrator if you don't know.
3. Beneath this, enter an e-mail address, known in the net-
work. We recommend that you use the e-mail address of
the RW-480 PLOTCLIENT WEB administrator.
4. Confirm the entries with "accept".

Administrator password (admin)

Access to the configuration pages is usually via the fixed defined
"admin" account using the password "admin". The user ID and
password can be set individually on the following page, which
you open by clicking on the "administrator" button:
Enter the user name and the password in the fields. The pass-
word must be confirmed. All entries are confirmed with "accept".
The access ID of the administrator does not permit access to the
job processing. As the job editor you need your own user rights.
It is not possible to set up several different administrator ac-
cesses.
To reset the set administrator access to the installation defaults
(admin/admin), the password file "passwd" in the client sub
folder .../webroot/config/ must be deleted.
CONFIGURATION
RW-480 CLIENTS 113