Prepare Print Jobs; Plot Sequence; Open And Log On - Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual

Prepare print jobs

In the editing windows of RW-480 PLOTCLIENT WEB, you can
collate print jobs, determine the print parameters and check the
status of the print jobs sent.

Plot sequence

This chapter first explains how you can purposefully prepare a
job. The following chapters contain a detained explanation of
the individual steps, which are now listed in abbreviated form:
1. Start a browser program. Open the start page of RW-480
PLOTCLIENT WEB by entering the address in your browser.
2. Log in using your user name and password.
3. First choose the print parameters for the job. These are
general properties, like the settings for a security print or
entering an e-mail address for notification of the successful
completion of a job. The job name is issued automatically.
4. Now choose the print parameters, which are to apply for all
entries (drawings and documents). For example, you deter-
mine the format of the drawings or the medium, on which
the plots are to be printed. These settings can however be
changed for new entries. Subsequent change is possible for
each individual entry.
5. For HPGL or Calcomp drawings, you can enter the pen set-
tings for the plotter.
6. Insert the job entries individually or simultaneously.
7. The job can now be sent to RW-480 PLOTBASE.
8. With the aid of a status page, you can check whether the
job has been transferred to RW-480 PLOTBASE and inform
yourself of the status of the job processing. You are auto-
matically informed of the status by e-mail, if you have set
this in the print parameters for the job.

Open and log on

Start the browser and open the start window, by typing the fol-
lowing address in the address line of your browser:
http://<Server>/pcweb/
PREPARE PRINT JOBS
RW-480 CLIENTS 114