Pen Settings (Pen Settings); Hpgl - Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual

• Stamp Position
Select a stamp position on the drawing from the list field.
After you have entered all the settings, you must confirm them
by clicking on the "accept" button.
You can make subsequent changes for individual entries. Read
chapter "Entry list", Page 132.

Pen settings (pen settings)

You can determine individual pen assignments for HPGL and
Calcomp-drawings. Open the relevant page by clicking on the
"pen settings" button.
You can save several, user-specific pen settings, by entering a
name in the pen descriptions field. You can call up this name
and thus the pen settings in the print parameters ("entry de-
faults"). The selection is made in the "pens" list field.

HPGL

• Step size/cm
The standard is 400 steps per centimeter. The RW-480
PLOTCLIENT WEB therefore enters 400 as a default value,
which does not normally have to be altered. Nevertheless, it is
sometimes advisable to ask the customer what step number per
centimeter they are used to working with to guarantee plot con-
sistency. Furthermore, it can be necessary to make a change to
reduce the DPI, to release more system memory for large draw-
ings:
Attention: If you enter a larger value, you will obtain
a s m a l l e r drawing: The entry 1 equates to 0.25 %.
Example: if you enter 401, the drawing is reduced to
99.75 %.
• Scale Pens
Activate the check box, if the pen widths are to be scaled with
the drawing. To avoid possible loss of information during the
printout, you must ensure that you have entered at least one
PREPARE PRINT JOBS
RW-480 CLIENTS 124