Access In The Administrator Mode; Configuring The Printer Settings - Ricoh C220N - Aficio SP Color Laser Printer Software Manual

Access in the Administrator Mode

Follow the procedure below to access Web Image Monitor in the administrator mode.
Note
❒ When you access Web Image Monitor in the administrator mode, "Adminis-
trator" appears under [Login].
Log on
A
On Top Page, click [Login].
The dialog box for entering the user name and password appears.
B
Enter the user name and password, and then click [OK].
Note
❒ For details about the login user name and password, consult your network
administrator.
Log off
Click [Logout] to log off.
Note
❒ When log on and made the settings, always click [Logout].

Configuring the Printer Settings

From the [Configuration] page, two menus are available to configure the settings.
Important
❒ To make printer settings, you must access Web Image Monitor in administra-
tor mode. If you access Web Image Monitor in user mode, you can view the
printer settings, but you cannot change them.
❖ Paper
Displays the [Paper] page.
On the [Paper] page, following operations are possible:
• Setting the paper size and type on the tray
• Printing a test page
❖ Network
Displays the [Network] page.
On the [Network] page, following operations are possible:
• Checking the information of the printer
• Interface settings
• Protocol settings
• Resetting to factory-set defaults
Using Web Image Monitor
4
33