Effects In Each Mode - Korg Krome Operation Manual

Using Effects

Effects in each mode

Program mode
For programs, you can use insert effects to process the
final sound in the same way that you use the Filter,
Driver, Amplifier, and EQ (equalizer) to process the
sound from the oscillators (OSC 1 & 2). Next, the
master effects are used to create overall ambience such
as reverb, and you use the total effect to make final
adjustments. You can apply an effect in the same way
to the output of a drum track program. All of these
settings can be made independently for each program.
Combination and Sequencer modes
In Combination and Sequencer modes, you can use the
track EQ and insert effects to process the sound of each
timbre/track program. Then you can use the master
effects to create overall ambience, and use the total
effect to make final adjustments.
In Combination mode, you can adjust these settings for
each combination, and in Sequencer mode you can
adjust them for each song.
In Sequencer mode, you can switch between effects or
modify the effect parameters and record these changes,
so that effects will switch automatically or effect
parameters will be modified automatically as the song
plays back.
Program mode
Oscillator1 Filter1
Oscillator2 Filter2
Drum Track
Combination and Sequencer modes
Timbre 1 /MIDI Track 1
Timbre 16 /MIDI Track 16
78
Driver1 Amplifier1
Driver2 Amplifier2 EQ
EQ
EQ
EQ
Send
Master Effect 1, 2
Insert Effect 1–5
Send
Master Effect 1, 2
Insert Effect 1–5
Return
OUTPUT
Total Effect
L/MONO, R
Return
OUTPUT
Total Effect
L/MONO, R