Specifications - Korg Krome Operation Manual

Appendices

Specifications

Operating temperature
Keyboard
System
Programs
Sound Engine
Combinations
Drum Kits
The number of
...
-Combinations
-Programs
-Drum Kits
Effects
Dual polyphonic arpeggiators
Drum Track
Sequencer
Media
134
0 – +40 °C
Semi-Weighted Keyboard (velocity sensitive, no aftertouch)
61-note
Normally C2–C7 (adjustable in the range [C1...C6]–[C3...C8])
Semi-Weighted Keyboard (velocity sensitive, no aftertouch)
73-note
Normally C1–C7 (adjustable in the range [C0...C6]–[C2...C8])
NH (Natural weighted hammer action) Keyboard (no aftertouch)
* The NH Keyboard delivers a playing feel similar to that of an acoustic piano, with low
88-note
notes being heavier and high notes being lighter.
EDS-X (Enhanced Definition Synthesis-eXpanded)
120 voices max, single mode
60 voices max, double mode
Maximum Polyphony
* The actual maximum polyphony will vary depending on oscillator settings such as
stereo multisamples and velocity crossfading.
3.8 Gbytes (when calculated as 48kHz 16-bit linear data)
Preset PCM 583 multisamples (including twelve stereo),
2,080 drumsamples (including 474 stereo)
OSC1 (Single), OSC1+2 (Double): Stereo multisamples are supported
Oscillator
8 velocity zones per oscillator, with switching, crossfades and layers.
Four types of filter routing (single, serial, parallel, 24 dB)
Filters
Two multi-mode filters per voice (low pass, high pass, band pass, band reject)
Driver Per-voice nonlinear driver and low boost.
EQ Three bands, with sweepable mid.
For each voice, two envelope generators (Filter & Amp), two LFOs, two key tracking
Modulation generators (Filter & Amp), and two AMS mixers
In addition, pitch EG, common LFO, and two common key tracking generators
Up to sixteen timbres, keyboard and velocity split/layer/crossfade, and modifications
16 Timbres
to the program setting via the Tone Adjust function
Master Keyboard
These allow you to control external MIDI devices
functionality
Stereo and mono drumsamples.
8-way velocity switches with crossfades and adjustable crossfade shapes (Linear, Power, Layer).
User Combinations 512 Combinations/384 Preload
User Programs 768 Programs/640 Preload
User Drum Kits 48 Drum Kits/32 Preload
Preset Programs 256 GM2 Programs + 9 GM2 Drum Programs
5 Insert Effects In-line processing; stereo in - stereo out.
2 Master Effects Two effects sends; stereo in - stereo out.
For overall processing on the main outputs, such as compression, limiting, and EQ;
1 Total Effect
stereo in - stereo out.
High, low, and sweepable mid band. Per Program in Program Mode, per Timbre in
3-band Track EQ
Combination mode (16 total), and per Track in Sequencer mode (16 total).
193 types (Usable for insert, master, or total effects. However, double-size effects
Effects types
cannot be used as the total effect.)
Modulation Dynamic Modulation, two common LFOs
Effects Control Bus Stereo side-chaining for limiter, gates, vocoders, etc.
Effects Presets Up to 32 per Effect
Program mode: one arpeggiator available. Combination and Sequencer modes: two arpeggiators available.
5 preset arpeggio patterns
1028 user arpeggio patterns (900 preload)
Preset patterns 605 patterns (Held in common with sequencer preset patterns.)
1,000 patterns. Patterns created in Sequencer mode can be converted to drum track
User patterns
user patterns.
Trigger Mode / Sync / Zone settings can be specified
16 MIDI Tracks & 1 Master Track
128 Songs
Resolution: 480 ppq (parts per quarter-note)
Tempo: 40.00–300.00 bpm (1/100 bpm resolution)
Up to 210,000 MIDI events
16 preset/16 user template songs
20 cue lists. Songs can be arranged consecutively or repeatedly in up to 99 steps. A cue
Cue List function
list can be converted back into a song.
605 Presets /100 User Patterns (per Song)
Patterns/RPPR
RPPR (Realtime Pattern Play/Recording): 1 set per Song.
Format Korg (KROME) format, SMF (formats 0 and 1) supported
Load, Save, Utility
Data Filer functionality (Save and Load MIDI System Exclusive Data)