Creating And Playing A Cue List; Creating A Cue List - Korg Krome Operation Manual

Creating songs (Sequencer mode)

Creating and playing a Cue List

A cue list allows you to play multiple songs in
succession. You can create the individual sections of a
song, such as the intro, melody A, melody B, chorus,
and ending, and then use a Cue List to assemble these
sections into a song by specifying the desired order
and the number of repetitions for each section. You can
then edit the cue list to efficiently try out different
structures for your song.
You can also use this as a jukebox function that will
play back completed songs in the order you specify.
Cue List
Step Song Repeat
01 02
S000: Intro
02
S001: A 02
S002: B
03 01
04 S003: Chorus 02
S001: A
05 02
01
06 S002: B
07 S003: Chorus 02
08 S001: A (Solo) 01
09 S003: Chorus
03
10 S004: Ending 02

Creating a cue list

Each unit in a cue list is called a "step," and each step
contains a song number and the number of repeats.
For example, suppose you've created the songs S000:
INTRO, S001: VERSE, and S002: CHORUS. Let's use a
cue list to connect these songs together.
1. Access the Seq P11: Cue List page.
With the default settings, song S000 will be selected for
"Step" 01, and End will be selected for "Step" 02.
2. Add a song to the Step area.
Select the "Song" for Step 02, and press the Insert
button. A song will be added to step 02. Press the
popup button, and then choose S001: VERSE from the
list.
In the same way, select the Step 03 "Song," and press
the Insert button to add a song to Step 03. Set this to
S002: CHORUS.
When you press the Cut button, the selected step will
be deleted and temporarily saved. When you press the
Insert button, the song that was cut will be insert at the
selected step.
If you press the Copy button, the selected step will be
copied. If you press the Insert button, the copied step
will be inserted.
74
Intro
Intro A A B Chorus
Chorus A A B Chorus
Chorus
A(Solo) Chorus Chorus Chorus Ending Ending
3. Set the last step to End.
If you set this to Continue to Step01, the cue list will
play back repeatedly.
4. In "Repeat," specify the number of times that the
song for that step will be repeated. For this
example, set Step 02 S001: VERSE to 02.
5. Specify whether effect settings will also be
switched when the song at each step is played
back. If you want effect settings to change, check
the "Load FX?" check box.
For this example, check the "Load FX?" check box for
Step 01, which loads the effects.
6. To play back at the tempo that was specified for
each song, set "Tempo Mode" to Auto.
If this is set to Manu (Manual), playback will use the
tempo specified by " =".
7. When you press the SEQUENCER START/STOP
( ) buttonh, playback will begin from the
step that is specified as the "Current Step."
Song Position Bar
• Step: The arrow will indicate the step that's
currently playing. indicates the currently selected
"Step." The Song Position Bar located below the
song name shows the progression of the song
within the step. While stopped, you can specify the
Current Step and the display will change
accordingly.
• M****: Indicates the starting measure of that step.
• Meter: Indicates the currently‐playing time
signature. This cannot be changed.
• The name of a cue list can be specified by the
Rename Cue List menu command.
• When you play the keyboard, the program of the
track selected by Track Select will sound. If a
different program is selected for each song, the