Simple Editing Using The Knobs; Saving A Combination You've Edited; Detailed Editing With Combinations - Korg Krome Operation Manual

Simple editing using the
knobs
You can use the Control Surface to perform a variety of
edits.
For example, you can use the control surface to adjust
the Filter cutoff or resonance. You can also use it to
vary the depth of an effect, or to change the way in
which the arpeggiator generates a phrase.
For details, please see "Realtime control knobs" on
page 25.

Detailed Editing with Combinations

You can edit the preloaded combinations (Banks A–C)
that the KROME is shipped with, or start with an
initialized Combination to create your own original
sounds.
You can use the factory Programs to create new
Combinations, or use your own custom Programs.
Note: If you're in the process of editing a Program in
Program mode, and you use that Program in a
Combination, you'll hear the edited version in
Combination mode as well.
Combination structure and corresponding pages
Timbre1
Parameters
Program 3Band EQ
Timbre2
Parameters
Program 3Band EQ
Timbre3
Parameters
Program 3Band EQ
Timbre4
Parameters
Program 3Band EQ
Timbre16
Parameters
Program 3Band EQ
Detailed Editing with Combinations Simple editing using the knobs
Saving a Combination you've
edited
After you've edited a combination, you must save it if
you want to keep the changes you've made. If you re‐
select the combination or turn off the power before
saving, your edits will be lost.
1. Press the WRITE button.
The Write Combination dialog box will appear. If you
want to change the writing destination or the name,
make the appropriate changes (see page 117).
2. Press the WRITE button once again to save (write)
the data.
For details, please see "Writing a Program or
Combination" on page 115.
You can also save combinations on an SD card as PCG
files.
For details, please see "Saving to SD card (Media–
Save)" on page 118.
About the edit pages
In the Combi P0: Play page you can select and play
combinations. Here you can also use the control
surface's knobs and the tone‐adjust function for quick
editing, or to edit the settings of the arpeggiator or
drum track. In the other pages you can edit the sound
in greater detail.
For details on each mode and how to access each page,
please see "Basic operations" on page 9.
Controllers: P1–1
Routing: P8-1, 2
Arpeggio: P7–1, 2, 3, 4, 5
Timbre
Insert Effects
Insert
Master Effects
Effects
1...5: P8
FX Control Bus
P1–1, P2–2, etc. indicate the on-screen pages and tabs used when editing on the KROME.
DrumTrack: P7–7
Tone Adjust: P0–7
Master
Effects
1, 2: P9
Total
Effects:
P9
AUDIO OUTPUT
L/MONO, R
47