Appendices; Restoring The Factory Settings; Loading The Preloaded Data; Initialization - Korg Krome Operation Manual

Restoring the factory settings

Loading the preloaded data

The original preload data is backed up in the KROME,
so you can restore any or all of the Programs,
Combinations, Drum Kits, User Arpeggio Patterns,
and Global settings to their original factory settings.
Note: The original demo songs can be re‐loaded at any
time. For details, please see "About the data loaded by
All (Preload PCG and Demo Songs)".
User banks and user patterns into which preload data
has not been loaded will remain unchanged. If you
want to erase user banks or user patterns, initialize the
KROME and then load the preload data. For more
details, please see "Initialization" on page 125.
Never turn off the power while the data is being
loaded.
Before you load the preload data, go to the Global
mode P0: Basic Setup– System Preferences page,
and uncheck the "Memory Protect" settings for the
data that you want to load. If you execute this
procedure with these settings checked, the data
will not be loaded.
Loading the preloaded data will overwrite the
contents of the internal memory. If you want to
keep the existing data that is stored in internal
memory, use "Save All (PCG&SNG)" or "Save
PCG" to save your data to external media before
you continue.
1. Access the Global mode P0: Basic Setup– Basic
page.
Enter Global mode by pressing the GLOBAL button
or by using the mode button.
If the Global P0: Basic Setup– Basic page is not
shown, press the EXIT button.
2. Press the menu button, and choose "Load Preload/
Demo Data."
A dialog box will appear.

Appendices

3. In the "Kind" field, select All (Preload PCG and
Demo Songs).
4. Press the OK button to load the preload data. If
you decide not to load the preload data, press the
Cancel button.
When you press the OK button, a dialog box will ask
you for confirmation. Press the OK button to execute
loading.
Note: When the dialog box is displayed, the ENTER
button performs the same function as the OK button.
About the data loaded by All (Preload PCG
and Demo Songs)
When you execute All Preload PCG, the following data
will be loaded:
• Program: Bank A, B, C, D, E
• Combination: Bank A, B, C
• Drum Kit: 00(INT)–31(INT)
• User Arpeggio Pattern: U0000(INT)–U899(INT)
• Global Setting
If you execute All (Preload PCG and Demo Songs), the
demo songs will be loaded as well as the above data.
• Demo Song: S000–003
Only when executing All (Preload PCG and Demo
Song)
Note: As with the other user songs, the Demo Song
data will not remain in Sequencer mode when you turn
off the power. You'll need to load it again if necessary.

Initialization

If your KROME should become unstable, you can
initialize it.
• Turn off the power, and then, while holding down
the EXIT button and PAGE button, turn the power
on.
The KROME will be initialized. While the data is
being loaded, the display will indicate "Now writ‐
ing into internal memory."
The resulting state will be the same as when Load
Preload/Demo Data All is executed (see page 125).
125