Table of Contents
Advertisement
2-18. How to select the sewing shape (bartacking setting)
A
C
E
1 Displaying the data entry screen
Only on the data entry screen (light blue), the sewing shape
selection is enabled. On the sewing screen (green), press the
set ready key
2 Bringing up the sewing shape selection screen
When you press sewing shape selection button
sewing shape selection screen is displayed.
3 Selecting the desired type of sewing shape
The following two different types of sewing shapes are avail-
able. If you want to change the standard pattern to the user
B
pattern or vice versa, press sewing shape type selection but-
B .
ton
Pictograph
D
*
Refer to
"@-2-29. How to set the device"
selection of the linear bartacking/zigzag bartacking of the
standard pattern.
4 Selecting the sewing shape
Press sewing shape button C which corresponds to the one
F
you want.
5 Confirming the sewing shape
Press enter button
have selected. Then, the data entry screen is displayed.
In the case you have selected the user pattern, the screen at
left is displayed. Pattern No. selection button E appears on
the screen. Press the pattern No. button which corresponds to
the one you want.
If you want to check the sewing shape you have selected,
press viewer button
played to show the sewing shape you have selected.
– 61 –
to the data entry screen (light blue).
Name
Max. number of patterns
Standard pattern
User pattern
D to confirm the sewing shape you
F . Then, the viewer screen is dis-
A , the
9
200
, p.91
for the
Advertisement
Table of Contents
