Table of Contents
Advertisement
2-17. Liquid crystal display at the time of setting the bartacking
(1) LK unit data entry screen
J
E
G
Symbol
Name of button
New user-pattern
A
register button
Thread clamp button
B
Presser lowering button
C
Threading button
D
A
Displays the new user-pattern register screen.
�@-2-23. How to register a new user-pattern�,
→ Refer to
Selects "enable/disable" of the thread clamp.
: Thread clamp is enabled
: Thread clamp is disabled
* In the case the thread clamp prohibition is selected with the memory switch U035,
the thread clamp button is not displayed.
Lowers the garment-body presser and the work clamp foot and displays the presser
lowering screen. It should be remembered, however, the error alarm buzzer sounds
and a press on the button is disabled if the set ready key has not at all pressed up
to that time.
�@-2-7. How to lower the garment body presser and the work
→ Refer to
clamp foot�,
p.40.
Displays the threading screen. It should be remembered, however, the error alarm
buzzer sounds and a press on the button is disabled if the set ready key has not at
all pressed up to that time.
�!-5-2. Winding a bobbin�,
→ Refer to
– 57 –
B
C
D
Description
p.20.
I
F
K
H
p.68.
Advertisement
Table of Contents
