3-8. Installing the auxiliary table
1
Loosen the butterfly nut on the top surface of the table. Install the auxiliary table for attaching straps left
1 and right 2 in place.
Install it at such a location where a clearance of 3 mm is provided between the throat plate 3 and each
auxiliary table.
Remove the start switch connector provided as standard at the time of delivery. Then, insert start switch
connector 4 which has been mounted on auxiliary table right 2 .
3-9. Installing the manual pedal (optional)
1
Open the cover of the control box. Insert connector CN88 of the manual pedal into connector 1 CN51
in the control box via the junction cable (40073659). Pass the cable through 2 in the control box.
A
4
2
3
2
Change the setting to "with optional pedal" on the
machine setting N803 A .
→ Refer to
�@-2-29. How to set the device�
– 12 –
2
,
p.91.