Table of Contents
Advertisement
2-11. How to select a belt loop pattern number
(1) Selection on the data entry screen
A
C
1 Displaying the data entry screen
The belt loop pattern number can be selected on the data
entry screen (blue). If the sewing screen (green) is displayed,
press set ready key
2 Bringing up the pattern number selection screen
When you press belt loop pattern number selection button
A , the belt loop pattern number selection screen is
displayed. The belt loop pattern number which is currently
selected and its details are displayed on the upper part of the
screen and the list of the belt loop pattern number buttons is
displayed on the lower part of the screen.
3 Selecting a belt loop pattern number
Every time you press up/down scroll buttons
the registered belt loop pattern number button C changes
D
over one after another. The button indicates the details of the
sewing data entered for the belt loop pattern number. Press
belt loop pattern number button C corresponding to the pat-
B
tern you want to select.
E
4 Confirm the belt loop pattern number
When you press enter button
number selection screen is closed to finish the selection.
*
If you want to delete the registered belt loop pattern number,
press delete button
the belt loop pattern No. registered in the cycle sewing cannot
be deleted.
– 47 –
to display the data entry screen.
D , the belt loop pattern
E . It should be noted, however, that
B ,
Advertisement
Table of Contents
