Removing And Replacing Internal Components; Removing And Replacing Dimms - HP Integrity BL870c User's & Service Manual

Figure 46 Replacing the Left Access Panel
4. Lock the access panel cam (if necessary) by turning the cam clockwise with the Torx T–15 or
flathead screwdriver.

Removing and Replacing Internal Components

These procedures describe how to remove and replace the internal components in the server blade.
The server blade contains the following field replaceable units (FRUs).
IMPORTANT:
must be serviced by authorized HP personnel.
DIMMs
Processors
SAS backplane
Air baffles
System battery
Front panel
Mezzanine cards
TPM module
System board
NOTE: The server blade must be removed from the enclosure to access the internal components;
therefore, no internal devices are hot-swappable or hot-pluggable in the server blade.

Removing and Replacing DIMMs

There are 24 DIMM slots located on the system board. The following procedures show how to
remove and replace DIMMs in the server blade.
120 Removing and Replacing Components
All FRUs are also customer replaceable units (CRUs), except the TPM. The TPM