Replacing Internal Components - HP ProLiant DL360 G7 Maintenance And Troubleshooting Manual

No.
• DL360G7 SRVR
146GB 10K SAS
2.5" HDD
• DL360G7 SRVR
146GB 15K SAS
2.5" HDD
• DL360G7 SRVR
300GB 10K SAS
2.5" HDD
• DL360G7 SRVR
PWR SUP 460W
HE
• DL360G7 SRVR
AC PWR SUP
750W
• DL360G7 SRVR
DC PWR SUP
1200W
4 Slide the server into
the rack (if
necessary)
5 Connect the power
cable(s) to the power
supply (if necessary)
6 Power up the server
(if necessary)

Replacing internal components

Use the checklist below to replace any of these internal server components:
700501424
700501322
700501425
Maintaining and Troubleshooting the HP ProLiant DL360 G7 Server
Task
MSG: Removal and
replacement
procedures > SAS and
SATA hard drive
MSG: Removal and
replacement
procedures > Hard
drive blank
MSG: Removal and
replacement
procedures > Hotplug
power supply
MSG: Removal and
replacement
procedures > Power
supply blank
UG: Installing the
server into the rack
UG: Powering up and
configuring the server
UG: Power up the
server
Part number
Reference Avaya recommendation
Ensure that the
replacement power supply
matches the specifications
of the defective power
supply.
Check that the Cable
Management Arm (if
present) moves freely out
of the way of rear panel
components.
Description
DL360G7 DVD-RW DRIVE W/ BRKT
DL360G7 SRVR DUAL PORT 1GB NIC
DL360G7 SRVR FAN FRU
Replacing internal components
November 2010 17