Specifying Parameters; Using The Setup Utility - HP Integrity BL870c User's & Service Manual

Example 24 sysmode command
Shell> sysmode
System Mode: NORMAL
Shell> sysmode admin
You are now in admin mode.
Shell> sysmode service
You are now in service mode.
Shell> sysmode normal
You are now in normal mode

Specifying Parameters

The following parameters may be configured for the board:
ID ( initiator ID)
Maximum data transfer rate ( rate)
Bus width
Whether the HBA is bootable (driver support)
Avoid bus resets (secondary cluster server)

Using the Setup Utility

The following procedure show how to use the Setup utility
164 Utilities