Installing The Operating System From The External Usb Dvd Device; Installing The Operating System Using Hp Ignite-Ux; Installing The Operating System Using Vmedia - HP Integrity BL870c User's & Service Manual

Video port
3
3. Reset (or reconnect) the server blade, and reboot to EFI.
4. Turn on the external USB DVD device.

Installing the Operating System from the External USB DVD Device

To install the OS from an external USB DVD device:
1. Insert the CD with the OS into the external USB DVD drive.
2. Use the EFI Boot Manager menu and boot to the drive that contains the CD with the OS.
3. From the boot menu, select EFI Shell (Built In).
4. At the EFI Shell prompt, specify the device name (for example, fs1:) for the DVD and enter
the EFI install command, as in the following example.
If the device is not automatically selected, select the device name for the DVD and run the
install. For example, from the EFI Shell prompt you see something similar to this:
Shell> fs1:
fs1:\> install
If you do not see the USB DVD drive, use the EFI Map command to list all the device names
from the EFI Shell prompt. The list of devices displays automatically, and the install process
selects the device for you. The Map command displays the following (this may not match
completely:
Seg Bus
# #
--- ---
00 00
00 00
00 00
00 00
00 00
00 20
00 40
00 40
00 80
00 80
00 80
00 80
The USB DVD device is the one shown in bold.
5. The OS now starts loading onto the server blade. Follow the on-screen instructions to fully
install the OS.
6. Continue with

Installing the Operating System Using HP Ignite-UX

The HP Ignite-UX product is an HP-UX administration tool that helps you install the HP-UX operating
system on multiple server blades on your network. HP Ignite-UX also enables you to:
Create custom install configurations, (for use in multiple installations on server blades)
Recover HP-UX server blades remotely
Create custom recovery media; including tape, CD, and DVD
Manage and monitor multiple server blade installation sessions
To install the OS onto the server blade using HP Ignite-UX, see the following HP
documentation:http://www.hp.com/go/sw-deployment-docs.

Installing the Operating System Using vMedia

Virtual media (vMedia) provides you with virtual devices that mimic physical hardware devices,
such as a virtual DVD drive that connects through the network to the server blade (as if they were
70 Booting and Shutting Down the Operating System
Dev Fnc Vendor Device Slot
# # ID ID
--- --- ------ ------
02 01 0x103C 0x1048
01 00 0x1033 0x0035
01 01 0x1033 0x0035
01 02 0x1033 0x00E0
02 00 0x103C 0x1290
01 00 0x1000 0x0030
01 00 0x1077 0x2312
01 01 0x1077 0x2312
01 00 0x14E4 0x1648
01 01 0x14E4 0x1648
03 00 0x14E4 0x1648
03 01 0x14E4 0x1648
"Configuring System Boot Options" (page
# Path
--- -----------
XX Acpi(HWP0002,0)/Pci(2|1)# MP
XX Acpi(HWP0002,0)/Pci(1|0)# USB - rope 0
XX Acpi(HWP0002,0)/Pci(1|1)# USB - rope 0
XX Acpi(HWP0002,0)/Pci(1|2)# USB - rope 0
XX Acpi(HWP0002,0)/Pci(2|0)# MP
XX Acpi(HWP0002,100)/Pci(1| # SCSI- rope 1
XX Acpi(HWP0002,200)/Pci(1|0) # FC
XX Acpi(HWP0002,200)/Pci(1|1) # FC
XX Acpi(HWP0002,400)/Pci(1|0) # LAN - rope 4
XX Acpi(HWP0002,400)/Pci(1|1) # LAN - rope 4
XX Acpi(HWP0002,400)/Pci(3|0) # LAN - rope 4
XX Acpi(HWP0002,400)/Pci(3|1) # LAN - rope 4
71).
- rope 0
- rope 0
- rope 2
- rope 2