Playing Other Sources; Selecting The Multichannel Analog Inputs - Pioneer VSX-815-S/-K Operating Instructions Manual

06 Listening to your system

Playing other sources

RECEIVER
INPUT SELECT
MULTI CONTROL
DVD/LD TV / SAT DVR/VCR
C D CD-R/TAPE TUNER
ADVANCED STEREO/
STANDARD SURROUND DIRECT
EFFECT
/CH SEL LEVEL
ACOUSTIC
DIALOG E
EQ
MUTE
Above: VSX-515 (left) and VSX-815/915 (right)
1 Turn on the power of the playback
component.
2 Turn on the power of the receiver.
3 Select the source you want to playback.
Use the MULTI CONTROL buttons (or INPUT
1
SELECT).
4 Start playback of the component you
selected in step 1.
Selecting the multichannel
analog inputs
If you have connected a decoder or a DVD
player with multichannel analog outputs to this
receiver (page 17), you can select them for
surround sound playback.
• Make sure you have set the playback
source to the proper output setting.
For example, you might need to set your DVD
player to output multichannel analog audio.
Note
1 If your source is the TV's built-in tuner, switch to the channel you want to watch, otherwise make sure that the TV's video input
is set to this receiver (For example, if you connected this receiver to the VIDEO 1 jacks on your TV, make sure that the VIDEO 1
input is selected). Turn down the volume of your TV so that all the sound is coming from the speakers connected to this receiver.
2 • When playback from the multichannel inputs is selected, you can't use ACOUSTIC CAL EQ, DIALOG E, INPUT ATT, TONE,
VSB and MIDNIGHT/LOUDNESS, as well as any of the listening modes (including STEREO/DIRECT and the Extended mode).
• When playback from the multichannel inputs is selected, only the volume and channel levels can be set.
• You can't listen to your speaker B (Second Zone) system during playback from the multichannel inputs.
44
En
INPUT
RECEIVER SOURCE
SELECT
SOURCE
TV CONT
RECEIVER
MIDNIGHT/
LOUDNESS
DVD/LD TV/SAT DVR/VCR TV CONT
SLEEP
MULTI CONTROL
FL
DIMMER CD CD-R/TAPE TUNER RECEIVER
2
VSX-515 model:
DVD/LD
INPUT SPEAKER
FL DIMMER ATT IMPEDANCE
• Press DVD 5.1 on the front panel.
DVD 5.1ch will show in the display and the
ANALOG SIGNAL SELECT indicator will light.
VSX-815/915 model:
ADVANCED
STANDARD SURR
LISTENING MODE
1 Press DVD/LD.
2 Press SIGNAL SELECT to select the
multichannel analog inputs.
DVD 5.1ch will show in the display and the
ANALOG SIGNAL SELECT indicator will light.
DVD 5.1 TV/SAT
EXTENDED ACOUSTIC
MODE EQ
ST/DIRECT SIGNAL
/AUTO SURR SELECT