Operating Range Of Remote Control Unit - Pioneer VSX-815-S/-K Operating Instructions Manual

Audio/video multi-channel receiver
Table of Contents

Advertisement

Controls and displays
DISPLAY
Switches between named station presets
and radio frequencies (page 56).
CLASS
Switches between the three banks
(classes) of radio station presets (page 55).
MPX
Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality (page 54).
D. ACCESS
After pressing, you can access a radio
station directly using the number buttons
(page 54).
8
Number buttons and other component
controls
Use the number buttons to directly select a
radio frequency (page 54) or the tracks on a
CD, DVD, etc.
DISC (ENTER) can be used to enter commands
for TV or DTV, and can also be used to select a
disc in a multi-CD player.
9
CHANNEL +/–
Use to select channels when using a TV, VCR,
DVR, etc.
10 Remote control LED
Lights when a command is sent from the
remote control.
11
SOURCE
Press to turn on/off other components
connected to the receiver (see page 64 for
more on this).
12 RECEIVER
Switches the remote to control the receiver
(used to select the green commands above the
number buttons (SYSTEM SETUP, etc). Also
use this button to set up surround sound
(page 10, page 46).
13 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CONT button. Thus if you
only have one TV to hook up to this system
assign it to the TV CONT MULTI CONTROL
button. If you have two TVs, assign the main TV
to the TV CONT button (see page 64 for more
on this).
Use to turn on/off the power of the TV.
INPUT SELECT
Use to select the TV input signal.
CHANNEL +/–
Use to select channels.
VOLUME +/–
Use to adjust the volume on your TV.
Operating range of remote
control unit
The remote control may not work properly if:
• There are obstacles between the remote
control and the receiver's remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that is
emitting infrared rays.
• The receiver is operated simultaneously
with another infrared remote control unit.
30
30
7m
05
35
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents