Pioneer VSX-815-S/-K Operating Instructions Manual page 32

05 Controls and displays
EFFECT/CH SEL
Press repeatedly to select a channel, then
use LEVEL +/– to adjust the level (see Tip
on page 53). Also adjusts the level of the
Advanced Surround effects (page 37) as
well as Dolby Pro Logic IIx Music (page 38)
and Neo:6 Music parameters (page 38).
You can then use the LEVEL +/– buttons to
make these adjustments.
LEVEL +/–
Use to adjust the effect and channel levels,
as well as to change Dolby Pro Logic IIx
and Neo:6 Music parameter settings.
10 SHIFT
Press to access the DVR controls (above the
component control buttons) as well as some
RECEIVER controls.
11 SOURCE
Press to turn on/off other components
connected to the receiver (see page 64 for
more on this).
12 Character display (LCD)
This display shows information when
transmitting control signals.
The following commands are shown when
you're setting the remote to control other
components (see Controlling the rest of your
system on page 64):
SETUP
Indicates the setup mode, from which you
choose the options below.
PRESET
See Selecting preset codes directly on
page 64.
LEARN
See Programming signals from other
remote controls on page 65.
DIRECT F
See Direct function on page 66.
32
En
ERASE
See Erasing one of the remote control
button settings on page 66.
RESET
See Erasing all of the remote control presets
on page 66.
READ ID
See Confirming preset codes on page 67.
13 RECEIVER
Switches the remote to control the receiver
(used to select the green commands above the
number buttons (FL DIMMER, etc). Also use
this button to set up surround sound (page 10,
page 46).
14 VOL +/–
Use to set the listening volume.
15 MUTE
Mutes the sound or restores the sound if it has
been muted (adjusting the volume also
restores the sound).