Engine Controls - Snapper 1695964 130.88768 Operator's Manual

FEATURES AND CONTROLS
®
I÷1 I×1
®
®
®
ILLOJ
®
®
Engine Controls
SNOWTHROWER CONTROLS (Continued)
H. Skid Shoe -- Used to adjust the ground clearance of the auger
housing.
I. Headlight -- Used to operate the snowthrower in poor lighting
conditions.
J. Heated Hand Grips --When the engine is running, the heated
hand grips wilt automatically turn ON. After the engine is shut
off, the heated hand grips will automatically turn OFR
ENGINE CONTROLS
A. Choke Control Knob -- Used to start a cold engine (see
Figure 3).
B. Electric Start Button -- Used to start the engine using the
electric starter.
C.
D.
E.
E
G.
H.
Figure 3
Primer Button -- Used to inject fuel directly into the carburetor
manifold to ensure fast starts in cool weather.
Safety Key -- Must be inserted to start engine. Pull out to stop.
Do not turn safety key.
Starter Cord Handle -- Used to start the engine manually.
ON/OFF Switch (if equipped) -- Used to start and stop the
engine.
Fuel Tank and Cap -- Fill the fuel tank to approximately
1-1/2 in. (38 mm) below the top of the neck to allow for fuel
expansion.
Oil Fill Cap (Extended Dipstick)
11