Lanier LD235 Operating Instructions Manual page 62

G
Enter a partial string for each search
condition.
Note
❒ Conditions (Name, E-mail Ad-
dress, Fax Number, Company
Name, and Department Name)
are those programmed in the
LDAP server.
❒ Press each condition to display
the entry field, where you enter
the necessary information.
❒ You can add one additional search
condition for LDAP servers by speci-
fying the Arbitrary Search Condition
under Program/Change/Delete
LDAP Server under System Set-
tings. See Network Guide for the
details.
❒ The string you enter in the [Name]
condition field is read as the
first or last name, depending on
the administrator's setting. For
example, to search for the name
"John Smith", ask the system
administrator whether you should
enter "John" or "Smith".
Searching for a Destination
H
Press [Search Criteria] for each con-
dition, and then select the search
criteria.
Note
❒ The meanings of the search cri-
teria are as follows:
• [Search Beginning Word]: Search
for strings that start with the
specified character.
Example: When searching
for "ABC", enter "A".
• [Search End Word]: Search for
strings that end with the
specified character.
Example: When searching
for "ABC", enter "C".
• [Exact Match]: Search for strings
that fully match the specified
character.
Example: When searching
for "ABC", enter "ABC".
• [Include One of Words]: Search
for strings that include the
specified character.
Example: When searching
for "ABC", enter "A", "B", or
"C".
• [Exclude Words]: Search for strings
that do not include the specified
character.
Example: When searching
for "ABC", enter "D".
• [Fuzzy Search]: Perform a fuzzy
search (according to the search-
ing method supported by the
LDAP server).
2
53