Getting Started; Control Panel - Lanier LD235 Operating Instructions Manual

Control Panel

The actual machine control panel may differ from this illustration depending on
installed optional units. This illustration has all options installed.
1.
Communicating indicator
Lights during transmission or reception.
2.
Confidential file indicator
Lights when a document is received into
memory with Confidential Reception or
Personal Box. See p.41 "Printing Personal
Box Documents", Facsimile Reference <Ad-
vanced Features> .
Blinks when a Memory Lock file is re-
ceived into memory. See p.38 "Printing a
File Received with Memory Lock", Fac-
simile Reference <Advanced Features> .
3.
{User Tools/Counter} key
User Tools:
Press to enter User Tools mode. These
tools allow you to customize default set-
tings. See p.141 "Facsimile Features",
Facsimile Reference <Advanced Features> .
Counter:
Displays and prints the total number of
copied or printed pages.

1. Getting Started

4.
Indicators
Shows errors and machine status.
L: Service Call indicator
x: Misfeed indicator
M: Open Cover indicator
d: Add Staple indicator
D: Add Toner indicator
B: Paper run-out indicator
See "Control Panel", General Settings
Guide.
5.
Display Panel
This guides you through tasks and dis-
plays the machine status. Messages ap-
pear here. See p.9 "Reading the Display".
6. {Check Modes} key
Press before pressing the {Start} key to
check the settings selected for the fax
about to be sent. See p.24 "Checking the
transmission settings".
7.
{Program} key
Enables you to program frequently used
settings and recall previously programmed
settings. See p.129 "Programs", Facsimile
Reference <Advanced Features> .
AJC101S
7