Lanier LD235 Operating Instructions Manual page 113

Troubleshooting
Problem
Although a group specifica-
tion was set for the following,
reception was not possible.
Receiving Station for Transfer
Request, End Receiver for
Transfer Box, Forwarding,
Forwarding of Special Sender,
Reception Report e-mail, E-
mail TX Results, routing e-
mail received via SMTP.
5
104
Causes and solutions
A maximum of 500 parties can
be specified for a group.
Check if there are over the
specified numbers registered
in the address book. If a group
was registered in another
group or specified as Receiv-
ing Stations 1 to 5 for the
Transfer Box, transmission is
canceled but an error message
does not appear.
Reference
"Registering a Destination to
a Group", General Settings
Guide