Faxing; Placing Originals - Lanier LD235 Operating Instructions Manual

Placing Originals

Place the originals on the exposure
glass or the Auto Document Feeder
(ADF) in the proper way according to
the type of paper shown in the dia-
gram.
For details about original types and
how to set original sizes, see Copy Ref-
erence. You cannot use [Special Original ]
under Copy Function. See "Placing
Originals", Copy Reference.
Note that original sizes that can be au-
tomatically detected differ slightly to
those sizes listed in "Sizes Detectable
by Auto Paper Select", Copy Reference.
See p.215 "Original Sizes Difficult to
Detect", Facsimile Reference <Advanced
Features> .
❖ How to place A4, B4 JIS (Japanese
Industrial Standard), A3, 8
1
8 / "×14", and 11"×17" size originals
2
❖ How to place A5 and B5 JIS size
originals
Note
❒ When you place originals as shown
in the above illustrations, the fax
header on received faxes is printed
in the following positions.
1
/ "×11",
2
• *1 On the top of the fax
• *2 On the left side of the fax
Reference
p.83 "Initial Settings and Adjust-
ments"
Limitation
❒ If you place A5 size originals on
the exposure glass, they are not de-
tected. Place A5 size originals into
the ADF. See p.215 "Original Sizes
Difficult to Detect", Facsimile Refer-
ZLBH030E
ence <Advanced Features> .

2. Faxing

ZLBH020E
15