Printing With The Finisher - Ricoh LD225 Function Manual

Other Print Operations

Printing with the Finisher

You can collate or staple by installing the optional finisher. Make sure you read
the following precautions when using the optional finisher:
Reference
For information about optional finishers, see General Settings Guide.
To use the staple function, see p.119 "Staple".
❖ Be sure to make settings for options installed on the machine in the printer drivers.
Reference
To make settings for options in the printer drivers, see p.56 "Making Op-
tion Settings for the Printer".
4
❖ Be sure to set the paper size and paper orientation in the printer driver when using
duplex printing, combine (layout), and staple functions.
Reference
For details about duplex printing and layout, see the printer driver Help.
To use the staple function, see p.119 "Staple" and the printer driver Help.
Note
❒ Depending on the application, print settings may not be enabled and printed
output may not be as expected.
❖ When setting staple or collate in the printer driver, make sure that the Collate check
box is cleared in the application's [Print] dialog box.
If Collate is enabled in the application, printing will not be as intended.
118