Ricoh LD225 Function Manual page 56

J
Follow the on-screen instructions.
When installation is complete, the printer connected to "1394_00n" appears
in the [Printers] window: ("n" shows the number of printers connected.)
Note
❒ If the printer driver has already been installed, the printer icon is added to
the [Printers] window. In this case, printer driver installation is not necessary.
❒ If printing does not work properly after the installation, delete the port and
reinstall the printer driver. For details, see p.151 "The Machine Does Not
Print".
❒ If you do not want to install the printer when Found New Hardware Wiz-
ard starts under an operating system that supports SCSI print, disable the
device by following the procedure below.
A When the [Found New Hardware Wizard] dialog box appears, click [Next >].
B When the message "This wizard will complete the installation for this
Device: Unknown" appears, select the [Search for a suitable driver for my
device [recommended]] check box, and then click [Next >].
C When the message "Please choose your search and installation option."
appears, clear all check boxes from [Search for the best driver in these loca-
tions.], and then click [Next >].
D When the message "Driver Files Search Results" appears, select the [Dis-
able the device. The Add/Remove Hardware Wizard in the control Panel can be
able to complete the driver installations.] check box, and then click [Finish].
Installing the Printer Driver Using IEEE 1394 (SCSI print)
2
49