Craftsman 247.290000 Operator's Manual page 118

AttachingTheSeat
If the seatforyourtractorwasnot attached at the factory,followthe applicable
instructions belowto attachit.
2. Remove t he shoulder boltsandlocknutsfrom the seatmountingbracket
included inyourhardwarepack. S eeFigure 4.
f
Figure 4
2. Remove t he two self-tapping screws factory installedonthe tractor.See
Figure 5.
Using a1/4-inch driveratchetwith a%" socket, s ecure the seatbracket w ith
the self-tappingscrews removed in Step2.SeeFigure 6.
Figure 6
i_ll CAUTIO N: Donot useanytype of powertool (e.g.impactgun
or electricdrill with nut driverattached) w hentighteningthe self-
tappingboltsto attachthe seatbracket.
5. Position the seatassembly overtheseatmountingbracket, a ligningthe
holesprovided.
6. Installthe two shoulder boltsandlocknutsremoved fromthe seatmounting
bracketin Step1.SeeFigure 7.
Donot useany type of power tool (e.g.impact gunor electricdrill with nut
driver attached)when tightening the self-tapping bolts to attach the seat
bracket°
3.
Figure 5
Alignthe seatbracketinplaceoverthe holesfromwherethe self-tapping
screws wereremoved, asshowninFigure 6.
I0
Figure7