Makita 6093DW Instruction Manual page 8

Switch action
Tool speed is increased by increasing pres-
sure on the trigger. To start the tool,
simply pull the trigger. Release the trigger
to stop.
Trigger switch
CAUTION :
Before inserting the battery cartridge into the tool, always check to see that the trigger
switch actuates properly and returns to the "OFF" position when released.
Reversing switch action
This tool has a reversing switch to change
the direction of rotation. Slide the revers-
ing switch to the right for clockwise rota-
tion or to the left for counterclockwise.
Reversing switch
CAUTION :
• Always check the direction of rotation before operation.
• Use the reversing switch only when the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may ruin the tool.
Speed change
To change the tool speed, turn the speed
change knob so that the arrow of the de-
sired speed on the knob is aligned with the
refel'ence arrow on the tool body. If the
speed change knob does not turn easily,
switch on the tool and turn the knob again
while the tool is running under no load.
I 0- 400 R/min. Speed change knob |
]
Arrow 0 1,100 R/rain.