Table of Contents
Advertisement
ADDITIONAL
SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1. Do not charge Battery
Cartridge
when temperature
is BELOW 10°C
150°FD
or ABOVE
40°C
(104°F|.
2. Do not attempt to use a step-up transformer,
an engine generator or DC power
receptacle.
3. Do not allow anything
to cover or clog the charger
vents.
4. Do not short the battery
cartridge:
(1) Do not touch the terminals
with any conductive
material.
(2) Avoid storing battery cartridge in a container with other metal objects such
as nails, coins, etc.
(3) Do not expose
battery
cartridge
to water
or rain.
A battery short can cause a large current flow, overheating,
possible burns
and even a breakdown.
5. Do not store the tool and Battery
Cartridge
in locations
where the tempera-
ture may reach or exceed 50°C
(122°F).
6. Do not incinerate
the Battery
Cartridge
even if it is severely damaged
or is
completely
worn out. The battery
cartridge
can explode
in a fire.
7. Always
cover the battery terminals
with the battery
cover when the battery
cartridge is not in use.
ADDITIONAL
SAFETY RULES
1. Be aware that this tool is always in an operating
condition,
because
it does
not have to be plugged into an electrical
outlet.
2. Always
be sure you have a firm footing.
Be sure no one is below when
using the tool in high locations.
3. Hold the tool firmly.
4. Keep hands away from rotating
parts.
5. When drilling into walls, floors or wherever
"live"
electrical
wires
may be
encountered,
DO NOT TOUCH
ANY METAL
PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock
if you drill into a "live"
wire,
6. Do not leave the tool running.
Operate
the tool only when hand-held.
7. Do not touch the drill bit or the workpiece
immediately
after operation;
they
may be extremely
hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
Advertisement
Table of Contents
