Table of Contents
Advertisement
INSTANT TIMER RECORDING
Instant -13merRecording allows you to make simplified timer recording without using the program timer.
•
FOR ITR RECORDING
1. Be sure that the clock is set to the correct time.
(Refer to "CLOCK SEI-FING".)
2. Insert the cassette (one with the erase prevention
tab intact) into the cassette loading door.
3. Press "INPUT SELECT" button so as to select
Channel Number Display.
4. Press "CHANNEL"
Select Buttons to select the
channel to be recorded.
5. Press "TAPE SPEED" button to select the desired
speed.
•
STARTING
ITR NOW
F'---"
_Y
Q®®
®®®
@®®
"REC/ITR"
Button
To start
recording
immediately
and to set the
recording length (in 30-minute increments).
1. First perform
Steps 1 through
5 of "FOR ITR
RECORDING".
2. After
recording
has started,
press
REC/ITR
button once again to indicate the recording time
on the display.
INSTANT TIMER RECORD
CH 02
TAPE SPEED: SP
START
01: 09PM
LENGTH
0:00
For each press, the time changes as in the chart
below.
EXAMPLE: CURRENT TIME 01:09 PM
REC/ITR Button
LENGTH display
(ITR STOP TIME)
1 press
0:00
2 presses
0:30
3 presses
1:00
17 presses
8:00
18 presses
8:30
19 presses
9:00
20 presses
0:00
RECALLING
THE ITR SETTING
Press the REC/ITR
button,
and the recalled
ITR
setting will be displayed on the screen. The recalled
ITR setting will automatically
return to the current
position in 5 seconds.
NOTE:
To recall
the recording
time, press the
REC/ITR button only once. If you press this button
twice or more, the recording time will be changed.
TO CANCEL THE ITR SE'rrlNG
1. Press the "POWER"
ON/OFF
button or STOP
button to stop the VCR during ITR operation.
NOTES:
oThe
timer display
will
show the present
time
during Instant "13merRecording.
o The recording
time can be extended
any time
during "ITR" by pressing "REC/ITR" button.
Press "REC/ITR"
button to reset the length of
recording
in 30 minute increments
for up to 9
hours
and then to "END"
(the recording
will
continue until the end of the tape).
e To change
the "ITR"
program,
the previous
information must be cleared first.
• If "ITR" and the program timer recording overlap,
the former will override the latter.
• During
Instant
Timer
Recording,
you can not
change the Channel of the VCR.
If you want to view another channel,
press the
VCR/TV button to TV mode, and then select the
channel
to be viewed
with the TV's
channel
selector.
- .9(3 -
Advertisement
Table of Contents
