Table of Contents
Advertisement
POWER
Ooe
CHANNEL]
TRACKING
V.LOCK
PLAY
REW,(_
_
FF/[_
MENU
CLEAR
DISPLAY
@®®
®®®
@®®
CLOCK!
VISS
COUNT
RESET
© © ©
INPUT SELECT BUTTON (TU/AV)
TUNER: (TU)
To record signals
coming from the built-in
tuner
(Video and Audio).
AUDIONIDEO:
(AV)
To record signals coming from the VIDEO IN and
AUDIO IN terminals.
NOTE: This VCR can be used as an Audio deck
when Input Select button is in AV position.
"VCR/TV"
SELECTOR
Selects the program for viewing on your TV. The
"VCR"
position
(appears
the "VCR" indication)
supplies a signal to your TV on Channel
3 or 4
depending on the RF Channel Select Switch setting.
With the PLAY button pressed, the recorded tape
program is supplied to the "iV. With the RECORD
mode on the VCR, the -IV will display the program
as it is being recorded. The IV position (the "VCR"
indication is off) is used for regular TV operation
when the VCR is not being used.
This position also allows you to record one channel
while viewing another.
NOTES:
e When
the power
is turned on, the VCR/TV
selector
is
switched
to
the
VCR
mode
automatically.
e The VCR/TV
selector is switched to the VCR
mode when "PLAY" button is pressed.
"TAPE SPEED" BUTTON
Changes tape speed in the recording mode.
Record and playback time is as follows:
"TAPESPEED"
Indicator
SP
LP
EP
Video Cassette
T-60
T-120
T-160
60min.
120min.
160min.
I
120 min.
240 min. 1320 min.
180 rain.
360 min.
480 min.
In the playback mode, tape speed is automatically
selected to match the recording speed.
"SLOW" BUTTONS
Press "SLOW" button during play mode and the tape
is played back in the forward direction about 1/19
times
slower than the normal
speed
(SP or EP
recorded tape).
-91
-
Advertisement
Table of Contents
