Sears LXI series 580.53425390 Owner's Manual page 30

ERASING A TIMER PROGRAM
1. Press "MENU" button on the remote control to
display the menu.
2. Press "5" to erase a program. (Program Review).
3. Press "5" again if you want to review the next
program information.
4. Press "CLEAR" button when the program
information you want to erase is displayed.
5. When you are finished, press "MENU" button
again.
NORMALPROGRAM
PROGRAM1
CH04 SPEED SP
START TIME 06:00 PM
STOP TIME 07:30 PM
START DATE 09_2_3
THU
TO CONTINUEPUSH NO.5
TO ERASE PUSH CLEAR
TO END PUSH MENU
NOTE: When there is no program in the VCR, if you
press "5" to review or to erase in the menu mode,
the display will be shown (EMPTY) for 3 seconds.
\ ] /
-- EMPTY-
/ I \
TO END PUSH MENU
PROGRAM PRIORITY
When there is an overlap of the program timer settings,.
7:00 PM 8:00 PM
I I
9:00 PM 10:00 PM
I I
Case I
L
Pr°gr'°"°'! t
Case 2
s ,/ s/ ,t/ ,/s
I
,, s ," _" t" f'
Program No. 2
Program No. 1
I
Chooses lowest numbered program.