Table of Contents
Advertisement
Press four digits, two for the start month and two more
for the start date, (for example, "0" "9" "0" "2" to begin
recording
on September
2). The year and day of the
week are displayed automatically.
NORMAL PROGRAM
PROGRAM 1
OH 04
SPEED
SP
START TIME 06:00
PM
STOP
TIME 07:30
PM
START DATE
09/02/93
THU
TO END PUSH MENU
NOTES:
To change an incorrect entry, or an undesired entry, proceed as follows;
1. Press "CLEAR" button repeatedly until the digit to be changed flashes.
2. Enter the correct number.
ID Press "MENU" to enter your program and return to the
menu display.
If the program preset time is past, the "PAST TIME
PROGRAMMED" message will blink on the screen.
Return to the incorrect program and reprogram it with
the correct time.
NORMALPROGRAM
PROGRAM 1
CH O4
SPEED
SP
START TIME 01:00
PM
STOP
TIME 01:30
PM
START DATE
09/01/93
\ I
I
I
I
I
IWI_D/
- PAST TIME PROGRAMMED-
/
ITOIENI_ P(JSIJIMI_NU
\
i_ Press "MENU" again to return to the main menu display.
Additional program may be entered by repeating steps i}
- i_.
If you are finished programming and you want to set the VCR to record the programs you have entered, a)
make sure you have inserted a tape in the machine, and b) press the POWER button to OFF ("TIMER"
indication will light.).
The VCR is now set to record the preset programs.
CHECKING
THE TIMER
PROGRAM
Program can be checked whenever the VCR is tuned on.
1. Press "MENU" on the remote control to display the
menu.
2. Press "5" to review the program.
(Program
Review).
The program
review
menu will appear
on the TV
screen.
3. Press "5" again if you want to review the next program
information.
4. When you are finished, press "MENU" again.
NORMALPROGRAM
PROGRAM 1
CH 04
SPEED
SP
START TIME 06:00 PM
STOP
TIME 07:30 PM
START DATE 09/02/93
THU
TO CONTINUE PUSH NO.5
TO ERASE PUSH CLEAR
TO END PUSH MENU
Advertisement
Table of Contents
