Table of Contents
Advertisement
PAUSE/STILL
When "PAUSE/STILL"
button
is pressed
during
recording. "RECP" will appear and the VCR will stop
recording. This feature can be used for eliminating
unwanted station breaks or program material while
recording
a TV program or when using a camera
from one scene to another.
To start again press
"PAUSE/STILL"
button, and "P" indication will go off
and the
VCR
will
continue
recording.
When
"PAUSE/STILL"
button is pressed during playback,
"STILL" will appear and a still picture can be seen.
To start again press "PLAY" button and the VCR will
continue playback.
NOTES:
1. If a noise band is seen during STILL, first press
"SLOW" button and "TRACKING"
(" • " or " •
")
button to eliminate the noise.
2. The tape recorded at LP mode will contain more
noise and flagging than the tape recorded at SP
or EP mode.
"PAUSE/STILL"
a_Nu
c_J_ c,_L*v
L2 ®°
"PLAY, Button
3. When the PAUSE (STILL) mode continues
for
more
than
about
5 minutes,
the VCR
will
automatically
change to stop mode to protect the
tape.
FRAME ADVANCE
Every time you press "F/ADV"
(Frame Advance)
button in the STILL (play pause) mode, tape will be
played back one frame at a time.
It operates
only after "PAUSE/STILL"
button has
been pressed.
Press the PLAY button to resume normal playback.
SLOW
When you press "SLOW" button during playback,
the tape will be played back at a speed about 1/19
times
slower
than the normal
speed
becomes
slower.
Press "PLAY" button to return to normal
playback
speed
or press "STOP"
button to stop
tape movement.
NOTES:
1.
.
.
The Slow feature is intended for use with SP and
EP recordings. The LP recordings will contain too
much noise (interference) to produce a viewable
picture.
During slow playback, "TRACKING"
buttons on
the Remote
Control can be used to minimize
noise bands.
When the slow mode continues
for more than
about 3 minutes,
the VCR will automatically
change to play mode to protect the tape from
damage.
ill ¸il ....
- .94 -
Advertisement
Table of Contents
