Table of Contents
Advertisement
IDENTIFICATION
AND OPERATION OF CONTROLS
Now that you have experienced the simple operation of your VCR, let's get familiar with the complete operation
of your VCR and all its capabilities.
I REAR I
"VHF/UHF OUTPUT"
75-ohm round Cable Connector connects to this
output. Opposite end of cable connects to the
television
through
the Antenna
Splitter
(not
supplied).
"AUDIO IN"
_,When this "AUDIO IN" jack, receive audio signals
_from
a Video Camera or anothe[ VC,R, the "INPUT
_ SELECT" button must be in the A/V position.
i{
If you select A/V,
AV indicator appears on the
_
screen.
OUT TO TV
IN FROM ANT
"VIDEO IN"
For connection
from another VCR, video camera
or other video equipment.
OUT"
Permits
video
connection
of your unit to a
monitor or another VCR.
"VHF/UHF INPUT"
Lead wire from antenna connects to this 75-
ohm input.
'AUDIO OUT"
The audio that is supplied to the television is also
available
at this jack. It can be connected
to an
external amplifier.
RF CHANNEL SELECT SWITCH
Slide the switch to "CH3" or "CH4" to match the
channel selector
on your -IV. This is the VCR
channel on your television set.
Advertisement
Table of Contents
