Table of Contents
Advertisement
OSD (On Screen Display) FUNCTION BUTTONS
MENU BUTTON
Used to enter the On-Screen Programming mode.
CLEAR BUTTON
Used to go backward and correct the programmed
information.
DISPLAY BUTTON
Press to display the VCR operation
mode, tape
counter, channel number, date and clock. Press this
button once again to remove the on-screen display.
Press this button twice to remove the clock display
(the
display
switches
by
pressing
the
"CLOCK/COUNT"
button when tape is inserted).
NUMBER BUTTONS "0" THROUGH "9"
Select any channel by pressing two buttons. (Press
"0" and then "8" for channel 8.) The number buttons
are also
used for setting
the On Screen
Pro-
gramming.
°.....
"100" BUTTON
Use to select TV channels
with number
100
above.
Press "100", "2" and "3" in this order to
select channel 123.
Press "100", "0" and "5" for channel 105.
VISS BUTTON
Use to enter the VISS function mode.
CLOCK/COUNT
BUTTON
To switch
the
display
between
the
counter,
remaining tape time, and clock modes.
NOTE: To "CLOCK/COUNT"
button does not work
when the tape is not inserted.
POWER
O
TU/AV
TVNCR
O0
CHANNEL/
TRACKING
V.LOCK
PLAY
MENU
CLEAR
DISPLA_
COUNTER "RESET" BUTTON
The readout of
the
tape
counter
will return to
"0:00:00" when this button is pressed.
ADD/ERASE BUTTON
Used to add or erase a selected channel memory.
Advertisement
Table of Contents
