Setting The Mic Position (Kx-Vc600 Only) - Panasonic KX-VC300 User Manual

Contacts and Settings
5.
Use [ ][ ] to select the following items for input:
"Welcome Screen Vol.": Press [Enter] and use
[ ][ ] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") played at the
start-up.
"Ringback Tone Vol.": Press [Enter] and use
[ ][ ] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") of an outgoing call
ring.
Note
•
The volume level of the busy tone will be the
same level as the ring back tone.
"Ring Tone Vol.": Press [Enter] and use [
[ ] to select the volume level ("OFF", "Low",
"Medium" [default] or "High") of an incoming call
ring.
"Default Sound Lev.": Use [
volume level (0–20) at the start of a video
conference call (default: 16).
"Sound Pre-sets": Press [Enter] and use [
[ ] to select the tone ("More Highs",
"Standard" [default], "More Lows", "Voice" or
"Music") at the start of a video conference call
(Page 67).
Note
•
You can listen to a sample of the following
items by pressing [R].
–
"Welcome Screen Vol."
–
"Ringback Tone Vol."
–
"Ring Tone Vol."
6.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
7.
Use [ ][ ] to select "Yes" and press [Enter].
•
The system settings screen is displayed.
8.
Press [Home].
•
The Home screen is displayed.
Setting the MIC Position
(KX-VC600 only)
You can specify where a Digital Boundary Microphone
is conceptually positioned relative to the display. When
sounds are transmitted to another party, they are played
92 User Manual
in accordance with the specified positions, which
creates a stereo environment.
Setting the MIC Position
automatically
1.
2.
3.
]
4.
][ ] to select the
]
5.
6.
Press [Menu].
•
The Menu screen is displayed.
Use [ ][ ] to select "Settings" and press
[Enter].
•
The system settings screen is displayed.
Press [ ].
•
The second page is displayed.
Use [ ][ ] to select "MIC Setting" and press
[Enter].
•
The auto settings screen is displayed.
Note
•
If the manual settings screen is displayed,
press [B] to return to the auto settings
screen.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
Use [ ][ ] to select "Yes" and press [Enter].
•
The system settings screen is displayed.
Note
•
Depending on how many Digital Boundary
Microphones are connected, the output
settings differ as follows: