Panasonic KX-VC300 User Manual page 28

Preparation
Amplifier/Active Speaker
Connection
This section describes how to connect an amplifier/
active speaker.
1.
Connect the amplifier/active speaker to the Audio
Out L/R jack on the back of the unit using a stereo
pin plug cable.
Note
•
Connect the amplifier/active speaker
correctly, as follows:
– Left channel ® L
– Right channel ® R
•
For more details about the amplifier or
active speaker, refer to the documentation
for the corresponding device.
Layout example:
Place the speakers either side of the display, as follows:
Microphone
Notice
•
Place the speakers either side of the display. If
you place the display at the front of the room
and the speakers at the back, the microphone's
left/right spatial direction may be reversed, and
the orientation of the image and sound will not
match on the other party's side.
28 User Manual
Speaker
Display
Main
video
camera
Speaker
Connecting the Display with a
Component Cable
If your display does not have an HDMI terminal, use a
component cable for connection.
1.
Connect the display to the Component terminal on
the back of the unit using a component cable.
Note
•
To use the display's speakers to output audio,
connect the display to the Audio Out L/R jack
(Page 19) on the back of the unit using a stereo
pin plug cable.