Displaying Unit Information - Panasonic KX-VC300 User Manual

Displaying Unit Information

1 Press [Status] twice.
•
The unit information screen is displayed.
Note
•
When you are not using a SIP server, "SIP
Username" and "SIP Domain Name" will be
blank.
•
The status of communication encryption is
displayed under "Encryption" and the
resolution for sending images is displayed under
"Resolution (send)". This information is not
displayed when communication is not occurring.
•
If [Status] is pressed twice during a video
conference call, you can press [R] to switch to
the next screen. That screen displays the unit
name, IP address/SIP URI (or SIP user name)/
MCU's conference room number@IP address/
MCU's SIP user name@IP address, packet loss
rate, connection bandwidth, resolution, frame
rate and field frequency for the 3 parties
displayed under "Site 1", "Site 2" and "Site
3".
*1*2
*1
"Frequency" is not displayed when connecting to an
MCU or non-Panasonic video conference system.
*2
Depending on the other party, "Name" may be blank.
Displaying the Connection Status
1
2
User Manual 79