Starting a Video Conference
Calling from the Contact List (2-party Conference/3-party
Conference/4-party Conference)
Note
•
To make a video conference call from the contact list, you must first register contacts in the contact list
(Page 82).
•
If "IP Address" is set to "Auto" on the network settings screen (Page 87), the unit's IP address will
be automatically obtained using a DHCP server, and therefore may change to a different IP address
from the one registered in the other party's contact list. In such cases, when the other party tries to call
you by selecting a registered IP address from their contact list, the call will not be connected. For details,
contact your network administrator.
1
Press [Menu].
•
The Menu screen is displayed.
2
Select "Contact List" using [
[Enter].
•
The contact list screen is displayed. The entries are
grouped in the index tabs and displayed in
alphabetical order of "Group/Site".
Note
•
You can also open the contact list screen by
pressing [Contact] while the following screens
are displayed:
–
Home screen
–
Menu screen
–
Computer's screen/sub video camera's
image (when not on a video conference call)
38
User Manual
][
] and press
1
4
2, 3
3
5