Displaying Unit Information - Panasonic KX-VC300 Operating Manual

Displaying Unit Information

1 Press [Status] twice.
•
The unit information screen is displayed.
•
The status of communication encryption is displayed
under "Encryption" and the resolution for sending
images is displayed under "Resolution (send)".
This information is not displayed when
communication is not occurring.
•
If [Status] is pressed twice during a video
conference call, you can press [R] to switch to the
next screen. That screen displays the unit name, IP
address, packet loss rate, connection bandwidth,
resolution, frame rate and field frequency for the 3
parties displayed under "Site 1", "Site 2" and "Site
3".
*1*2
*1 "Frequency" is not displayed when connecting to an MCU
or non-Panasonic video conference system.
*2 Depending on the other party, "Name" may be blank.
Document Version 2011-04
Displaying the Connection Status
2
1
Operating Manual 69