Basic Operation (Tuner); Listening To The Tuner; Preset Memory - Marantz SR4400 User Manual

2.
SETUP/
T.TONE
S-DIRECT
AV SURROUND RECEIVER SR4400 AV SURROUND RECEIVER SR4400
SURROUND
NIGHT
2.
DISPLAY
CLEAR
CLEAR MEMORY
A/D HT-EQ
STANDBY
6.1 6.1 6.1 6.1
POWER ON/STANDBY PHONES CH-IN CH-IN CH-IN CH-IN TV DVD VCR1
BASS
/A /ANT
1.
Select a desired Video source to decide the
routed video signal to the Monitor Outputs .
2.
Press the 6.1 CH-IN button on the front panel
or on the remote to switch the 6.1 channel
input.
3.
If necessary to adjust the output level of each
channel, use "6.1 Ch. INPUT LEVEL" in
SETUP menu system as desired.
Adjust the speaker output levels so that you
can hear the same sound level from each
speaker at the listening position. For the front
left, front right, center, surround left, surround
right and surround back speakers, the output
levels can be adjusted between –10 to +10
dB.
The subwoofer can be adjusted between –15
and +10 dB.
These adjusting result will be stored to 6.1 Ch.
INPUT condition. (see to page 20)
4.
Adjust the main volume with the MAIN
VOLUME knob or the VOL buttons on the
remote.
To cancel the 6.1 Ch. INPUT setting, press the 6.1
CH-IN button on the front panel or on the remote.
Notes:
• When the 6.1 Ch. Input is in use, you may not
select a surround mode, as the external decoder
determines processing.
• In addition, there is no signal at the record outputs
when the 6.1 Ch. Input is in use.
26
BASIC OPERATION
MENU OFF
AUTO DTS
(TUNER)
1 2 3
CSII EX/ES DSP
4 5 6
M-CH ST STEREO 6.1CH IN
7 8 9
MEMO A/D P.SCAN

LISTENING TO THE TUNER

0
CHANNEL/SKIP
TREBLE TUNE/SEARCH
AUTO TUNING
MODE DISP./RDS F.DIRECT
/B /VCR ATT PTY
3. 2. 1.
1.
V
DOWN
CLEAR MEMORY TUNING/PRESET TUNING/PRESET F/P F/P MODE
HT-EQ S-DIRECT DISPLAY MUTE
TV DVD VCR1 DSS/VCR2 CDR/MD TAPE CD TUNER TUNER
2.
(USING THE SR4400)
1.
To select tuner and desired band (FM or AM),
press the TUNER button on the front panel.
2.
Press the F/P(Frequency/Preset) button on
the front panel to appears frequency on the
display.
3.
Press the TUNING or
panel for more than 1 second to start the Auto
tuning function.
4.
Automatic searching begins then stops when
a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2.
Press 5 5 5 5 5 or 6 6 6 6 6 more than 1 second on the
remote.
3.
Automatic searching begins then stops when
a station is tuned in.
If tuning does not stop at the desired station, use to
the "Manual tuning" operation.
MANUAL TUNING
3. 2. 1.
DOWN
CLEAR MEMORY TUNING/PRESET TUNING/PRESET F/P F/P MODE
HT-EQ S-DIRECT DISPLAY MUTE
TV DVD VCR1 DSS/VCR2 CDR/MD TAPE CD TUNER TUNER
TV VCR1 DSS/VCR2 DVD
TUNER CD TAPE CDR/MD
(USING THE SR4400)
AUX AMP
1.
TV MAIN To select tuner and desired band (FM or AM),
VOL. SLEEP MUTE VOL.
press the TUNER button on the front panel
CLEAR MEMO A/D P.SCAN
2.
0
Press the F/P(Frequency/Preset) button on
CHANNEL/SKIP
front panel to appears frequency on the
BASS TREBLE TUNE/SEARCH
display.
MODE DISP./RDS F.DIRECT
3.
Press the TUNING
+/A /ANT –/B /VCR ATT. PTY
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press TUNER button twice within in two
seconds on the remote.
2.
Press 5 5 5 5 5 or 6 6 6 6 6 on the remote to tune in the
desired station.
button on the front
DIRECT FREQUENCY CALL
POWER
TV VCR1 DSS/VCR2 DVD
1. TUNER CD TAPE CDR/MD
AUX AMP
TV
VOL. SLEEP MUTE VOL.
OSD MENU
1.
To select tuner and desired band (FM or AM),
press the TUNER on the remote.
2.
Press the F.DIRECT button on the remote,
display will show "FREQ - - - ".
3.
Input your desired station's frequency with
numeric buttons on the remote.
4.
The desired station will automatically be
tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
TV VCR1 DSS/VCR2 DVD
1. TUNER CD TAPE CDR/MD
VOL
AUX AMP
TV MAIN
VOL. SLEEP MUTE VOL.
DOWN
ET F/P MODE MODE
CLEAR MEMO A/D P.SCAN
0
DISPLAY MUTE
CHANNEL/SKIP
CDR/MD TAPE CD TUNER
2. BASS TREBLE TUNE/SEARCH
MODE DISP./RDS F.DIRECT
+/A /ANT –/B /VCR ATT. PTY
When in the auto stereo mode, AUTO indicator
keeps to light on the display.
The "ST" indicator lights on when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
"TUNED" and "ST" indicators turn off.
If the signal is weak, it may be difficult to tune into
or button. the station in stereo. In such a case, press the
MODE button on the front panel or on the remote.
"AUTO" indicators turn off ,FM stereo broadcasts
are received in monaural and the "ST" indicator
turns off.
To return to auto stereo mode, press the MODE
button on the front panel or on the remote again.
AUTO indicator lights on the display.

PRESET MEMORY

With this unit you can preset up to 30 FM/AM
S-DIRECT AUTO DTS
stations in any order.
1 2 3
3.
NIGHT CSII EX/ES DSP
For each station, you can memorize the frequency
4 5 6
DISPLAY M-CH ST STEREO 6.1CH IN
and reception mode if desired.
7 8 9
CLEAR MEMO A/D P.SCAN
0
CHANNEL/SKIP
AUTO PRESET MEMORY
BASS TREBLE TUNE/SEARCH
This function automatically scans the FM and AM
2. MODE DISP./RDS F.DIRECT
band and enters all stations with proper signal
+/A /ANT –/B /VCR ATT. PTY
strength into the memory.
DISC/DECK
5. 2.
SYSTEM REMOTE CONTROLLER
AV SURROUND RECEIVER SR4400 AV SURROUND RECEIVER SR4400
SURROUND
CLEAR CLEAR
A/D
PHONES 6.1 6.1 CH-IN CH-IN TV
1.
To select FM , press the TUNER button on the
front panel.
2.
While pressing the MEMORY button, press
the TUNING
VOLUME
MODE DISP./RDS F.DIRECT
+/A /ANT –/B /VCR ATT. PTY
UP
DISC/DECK
SYSTEM REMOTE CONTROLLER
RC5400SR
2.4. 3. 1. 3.
2) 1)
VOLUME
DOWN UP
MEMORY MEMORY TUNING/PRESET TUNING/PRESET F/P MODE MODE
HT-EQ S-DIRECT DISPLAY MUTE
DVD VCR1 DSS/VCR2 CDR/MD TAPE CD TUNER TUNER
button to up.