Advanced Connecting; Connecting Remote Control Jacks - Marantz SR4400 User Manual

ADVANCED CONNECTING

DVD AUDIO PLAYER
or
SACD MULTI CHANNEL PLAYER
CENTER
L
R
SURR. SUB
FRONT SURR.
BACK WOOFER
R L R L
L R L R
CONNECTING MULTI CHANNEL AUDIO SOURCE
The 6.1CH INPUT jacks are for multi channel
audio source such as SACD multi channel player,
DVD audio player or external decoder.
If you use these jacks, switch on 6.1CH INPUT
and setup 6.1CH INPUT level by using SETUP
MAIN MENU. See page 20.
R L R L
R L R L
CENTER
L
R
FRONT SURR. SURR. SUB
BACK WOOFER
POWER
AMPLIFER
Subwoofer
Front Front
Center
Right
Left
Surround Surround
Left Right
Surround
Back
CONNECTING EXTERNAL POWER AMPLIFIER
The PREOUT jacks are for connecting external
power amplifiers , you can have better sound
quality.
Be sure to connect each speaker to the corre-
sponding external power amplifier.

CONNECTING REMOTE CONTROL JACKS

You can control other Marantz products through
this unit with the remote controller by connecting
REMOTE CONTROL terminals on each unit.
The signal transmitted from the remote controller
is received by the remote sensor on this unit then
the signal is sent to the connected device through
this terminal. Therefore you need to aim the
remote signal only to the unit. Also, if a Marantz
power amplifier (some models excluded) is
connected with this terminal, the power amplifier's
standby function is synchronized by pressing the
POWER button on the remote.
Set the REMOTE CONTROL SWITCH on the
units other than this unit to EXT.(EXTERNAL) for
this feature.
REMOTE
CD RECORDER
CONTROL
IN
OUT
EXTERNAL INTERNAL
REMOTE
MD DECK
CONTROL
IN
OUT
EXTERNAL INTERNAL
REMOTE
CD PLAYER
CONTROL
IN
OUT
EXTERNAL INTERNAL
13