Basic Operation (Tuner); Listening To The Tuner; Preset Memory - Marantz SR5400 User Manual

BASIC OPERATION
(TUNER)

LISTENING TO THE TUNER

Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country's
standard is 9 kHz step, Press TUNER button on
the remote more than 6 seconds. Scan step will
change.
Note:
• Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
TV
3. 2. 1.
1. TUNER
TV
VOL.
DOWN
R MEMORY TUNING F/P MODE CLEAR
FF 6.1CH INPUT A/D S-DIRECT DISPLAY
MUTE
DVD VCR1 DSS/VCR2 AUX CD-R TAPE CD TUNER
2.
BASS
S-VID
+/A /ANT
(Using the SR5400)
1.
To select tuner and desired band (FM or AM),
press the TUNER button on the front panel.
2.
F/P button on the front panel to display the
frequency.
3.
Press the TUNING or button on the front
panel for more than 1 second to start the Auto
tuning function.
4.
Automatic searching begins then stops when
a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2.
Press the 5 5 5 5 5 or 6 6 6 6 6 for more than 1 second on
the remote.
3.
Automatic searching begins then stops when
a station is tuned in.
If tuning does not stop at the desired station, use
to the "Manual tuning" operation.
26
MANUAL TUNING
3. 2. 1.
1.
R MEMORY TUNING F/P MODE DOWN
FF 6.1CH INPUT A/D S-DIRECT DISPLAY
MUTE
DVD VCR1 DSS/VCR2 AUX CD-R TAPE CD TUNER
2.
S-VI
(Using the SR5400)
1.
To select tuner and desired band (FM or AM),
press the TUNER button on the front panel
2.
Press the F/P (Frequency/Preset) button on
front panel, to have the frequency appear on
the display.
3.
Press the TUNING or
VCR1 DSS/VCR2 DVD
(Using the remote control unit)
CD TAPE CDR/MD
1.
To select tuner and desired band (FM or AM),
AUX AMP
press the TUNER button twice within in two
MAIN
SLEEP MUTE VOL.
seconds on the remote.
MEMO A/D P.SCAN
2.
Press the 5 5 5 5 5 or 6 6 6 6 6 on the remote to tune in the
0
CHANNEL/SKIP
desired station.
TREBLE TUNE/SEARCH
MODE DISP./RDS F.DIRECT
DIRECT FREQUENCY CALL
/VCR
–/B ATT. PTY
3.
POWER
TV VCR1 DSS/VCR2 DVD
1. TUNER CD TAPE CDR/MD
AUX AMP
2.
TV
VOL. SLEEP MUTE VOL.
OSD MENU
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within two
seconds on the remote.
2.
Press the F.DIR on the remote, display will
show "FREQ - - - -".
3.
Input your desired station's frequency with the
ten numbered keypad on the remote.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
TV VCR1 DSS/VCR2 DVD
TUNER CD TAPE CDR/MD
VOLUME
AUX AMP
TV MAIN
VOL. VOL.
SLEEP MUTE G F/P MODE DOWN
S-DIRECT DISPLAY
CLEAR MEMO A/D P.SCAN
MUTE
0
CHANNEL/SKIP CD-R TAPE CD TUNER
AUX INPUT
S-VIDEO VIDEO L
BASS TREBLE
TUNE/SEARCH
MODE DISP./RDS F.DIRECT
+/A /ANT –/B /VCR ATT. PTY
When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
The "ST" indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
"TUNED" and "ST" indicators are not illuminated.
If the signal is weak, it may be difficult to tune into
buttons. the station in stereo. In such a case, press the
MODE button on the front panel or press the MODE
button on the remote.
"AUTO" indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the "ST"
indicator is not illuminated.
To return to auto stereo mode, press the MODE
button or press MODE button on the remote again.
AUTO indicator is illuminated on the display.

PRESET MEMORY

S-DIRECT AUTO DTS
1 2 3
With this unit you can preset up to 50 FM/AM
NIGHT CSII EX/ES DSP
4 5 6
stations in any order.
DISPLAY M-CH ST STEREO 6.1CH IN
7 8 9
For each station, you can memorize the frequency
CLEAR MEMO A/D P.SCAN
0
and reception mode if desired.
CHANNEL/SKIP
BASS TREBLE TUNE/SEARCH
AUTO PRESET MEMORY
MODE DISP./RDS F.DIRECT
This function automatically scans the FM and AM
+/A /ANT –/B /VCR ATT. PTY
band and enters all stations with proper signal
DISC/DECK
strength into the memory.
SYSTEM REMOTE CONTROLLER
5. 2.
AV SURROUND RECEIVER SR5400
SELECTOR
CLEAR MEMORY
VIDEO OFF 6.1CH INPUT
SELECT ENTER
TV DVD VCR1
STANDBY
POWER ON/OFF PHONES
1.
To select FM , press the TUNER button on the
front panel.
2.
While pressing the MEMORY button, press
the TUNING
MODE DISP./RDS F.DIRECT
"AUTO PRESET" will appear on the display,
/VCR
+/A /ANT –/B ATT. PTY
UP
and scanning starts from the lowest frequency.
DISC/DECK
3.
Each time the tuner finds a station, scanning
ATT
SYSTEM REMOTE CONTROLLER
RC5400SR
will pause and the station will be played for
AUDIO R
five seconds.
During this time, the following operations are
possible.
The band can be changed by the TUNER button.
4.
If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the
TUNING
is skipped and auto presetting continues.
5.
Operation stops automatically when all 50
preset memory positions are filled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.
MANUAL PRESET MEMORY
2. 4.
RECEIVER SR5400
CLEAR MEMORY
VIDEO OFF 6.1CH INPUT
TV DVD VCR1 DSS/VCR2
S
(Using the SR5400)
1.
Tune into the radio station you desire (Refer to
the "MANUAL TUNING" or "AUTO TUNING"
2.4. 1. 3.
section).
2.
Press the MEMORY button on the front panel.
VOLUME
"– –" (preset number) starts blinking on the
display.
DOWN UP
TUNING F/P MODE
3.
A/D S-DIRECT DISPLAY Select the preset number by pressing the
MUTE ATT
DSS/VCR2 AUX CD-R TAPE CD TUNER
TUNING
AUX INPUT
S-VIDEO VIDEO L AUDIO R
blinking (approx. 5 seconds)
4.
Press the MEMORY button again to enter.
The display stops blinking.
The station is now stored in the specified
preset memory location.
button up.
button during this period, this station
3.
OK
SETUP/ MENU OFF
T.TONE
S-DIRECT AUTO DTS
1 2 3
3.
NIGHT CSII EX/ES DSP
4 5 6
TUNING F/P M DISPLAY M-CH ST STEREO 6.1CH IN
7 8 9
2.
A/D S-DIRECT D CLEAR MEMO A/D P.SCAN
0
CHANNEL/SKIP
AUX CD-R TAPE CD
BASS TREBLE TUNE/SEARCH
MODE DISP./RDS F.DIRECT
or button, while this is still