Marantz SR4400 User Manual page 21

L&R :
Set the distance from the front left and right
speakers to your normal listening position
between 1 and 30 feet in 1.0 foot interval (0.3 to
9 meters in 0.3-meter intervals).
C :
Set the distance from the center speaker to your
normal listening position between 1 and 30 feet
in 1.0 foot interval
(0.3 to 9 meters in 0.3-meter intervals).
SLR:
Set the distance from the surround left and right
speaker to your normal listening position
between 1 and 30 feet in 1.0 foot interval (0.3 to
9 meters in 0.3-meter intervals).
MENU STRUCTURE of Speaker Distance setup
Speaker
Size setup
Speaker
L&R
C
Speaker
SLR
Distance setup
SW
SB
NEXT
Speaker
Level setup
18
SW :
Set the distance from the subwoofer to your
normal listening position between 1 and 30 feet
in 1.0-foot intervals (0.3 to 9 meters in 0.3-meter
intervals).
SB:
Set the distance from a surround back speaker
to your normal listening position between 1 and
30 feet in 1.0-foot intervals (0.3 to 9 meters in
0.3-meter intervals).
Note
• Speakers that you selected "No" or "None" for in
the Speaker Size menu will not appear.
Distance
30 feet (3.0m)
Maximum
29 feet (2.7m)
1 foot (0.3 m) interval
2 feet (0.6m)
Minimum
1 feet (0.3m)
EXIT TO MAIN MENU RETURN
exit SETUP MAIN
Speaker
MENU MENU
Size setup
SPEAKERS LEVEL
Here you will set the volume for each speaker so
that they are all heard by the listener at the same
level.
Note:
• The speaker level settings is not available in
6.1channel input mode and S-Direct mode.
TEST MODE : Selects "MANU (manual)" or
"AUTO" for generating mode of
test tone or
If you select "AUTO" by pressing the
test tone will be cycled through in a circular pattern
which is L (Left) → C (Center) → R (Right) → SR
(Surround Right) → SB (Surround Back) → SL
(Surround Left) → SW (Subwoofer → L →..
increments of 2 seconds for each channel.
Using the and cursor buttons, adjust the
volume level of the noise from the speaker so that
it is the same level for all speaker.
When you select "TO MAIN MENU" by pressing
the OK button, you can return the SETUP MAIN
MENU by pressing the OK button . Or press the
or cursor button to select "EXIT" then press the
button
OK button to exit the SETUP MENU.
Or press the or cursor button to select
"RETURN" then press the OK button to return the
previous "SPEAKER DISTANCE" setup.
If you select "MANU", adjust the output level of
button
each speaker as follow.
AUX AMP
TV
2. 5.
VOL. SLEEP MUTE
OSD
1. 5.
OK
1. 3. 5.
SETUP/
MENU OFF
T.TONE
S-DIRECT AUTO
1 2
NIGHT CSII EX/ES
4 5
1.
When you select "MANUAL" in T.MODE menu
by pressing the or button, this unit will emit
a pink noise from the front left speaker. At this
time, adjust the desired level of the master
volume. Remember the level of this noise and
then press the button. This unit will emit the
pink noise from the center speaker.
2.
Using the and
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker (Note that this can be adjusted to
any level between –10 and +10 dB in 1dB
intervals).
Maximum
cursor button.
button, the
1 dB interval
Reference
1 dB interval
Minimum
3.
Press the cursor button again. This unit will
now emit the pink noise from the front right
speaker.
4.
Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.
5.
When you select "TO MAIN MENU" by
MAIN
VOL. pressing the OK button, you can return the
SETUP MAIN MENU by pressing the OK
button . Or press the
MENU
select "EXIT" then press the OK button to exit
the SETUP MENU.
Or press the
"RETURN" then press the OK button to return
5.
the previous "SPEAKER DISTANCE" setup.
DTS
3
DSP
6
cursor buttons, adjust the
+10dB
+9dB
button
0dB
button
-9dB
-10dB
(SW -15 dB)
or cursor button to
or button to select